Question:

 How to connect my BD Player to my Access Point (SSID) when the full name is not displayed?

Answer:

If the name of your Access Point (SSID) is only partially displayed (full name does not appear), you must do one of the following:

1. Manually specify the SSID in the BD Players network configuration
2. Modify the SSID at the router's setup page to remove spaces.

We recommend that you manually specify the network information, however, should you choose to modify the SSID, you may find the following link helpful, Access Point (SSID) Is Not Detected Or Not Identified By Its Full Name.

To Manually Specify the SSID

1. At the Access Point Selection screen, scroll to Other Network and press Enter.



Note: Image is for illustration purposes only and does not reflect actual Access Points.  Access Points will differ for all users and may change frequently depending on wireless networks available.  

2. Using the on screen keyboard and the arrow buttons on your remote control, enter the exact network SSID and press the Blue D button to Connect.

Note: SSID is case sensitive. Be sure to include any spaces or underscores.

3. Select security type. If your wireless network is not protected and does not require a security key, select Open and press Enter to connect.
• If your network is protected, choose the appropriate encryption type between WEP, WPAPSK or WPA2PSK and enter your security key using the on screen keyboard. When you are done entering your password, press the blue D button on your remote to connect.
• If you do not know what type of encryption your network is using, you can try entering the security key for each option without negatively affecting the setup.

Note: If the D button does not respond, either the SSID or security key was entered incorrectly. Re-enter the SSID and security key taking care to enter lower case and capital letters where required.

4. If the SSID and security key are entered correctly, Connecting appears on the screen. Allow 1-2 minutes for the connection to be completed.
   
5. When completed, Connected appears and the Network Menu returns.  Use the arrow keys to scroll down to Network Connection Test and press Enter.
• If the network connection test passes, you have successfully connected to your network and can begin using online services such as Netflix and Pandora.**
• If any part of the network connection test fails, run the test again.  If it continues to fail, click here to go to Network Connection Test Failed for further troubleshooting.

**Setting up a connection to your home network does not automatically connect your player to computers on the network.  To use the PC Connect feature, you must connect to a computer.