Home > Setup & Installation > Connect > How To Connect A Recording Device > Connect A Recording Device To A TV With No Set-Top-Box > Connect A Recording Device With A Digital Tuner
Connect A Recording Device With A Digital Tuner
Cyber

To connect a recording device with a digital tuner to your TV follow the instructions below:

Required Cables:

  • One length of Coaxial (RF) Cable (long enough to go from the wall to the recorder)
  • Second length of Coaxial (RF) Cable or one of the connection cables shown below depending on the connections available on your recording device.

    • Note: If you choose to use one of the SD connections you will not be able to recieve a High Definition (HD) picture on your television from the recorder.

HD Connections

Component Cables

HDMI Cable

DVI-to-HDMI Cable with Audio Cables

SD Connections

For directions on how to connect a recording device using these connection types click on the connection type you want to use below.

 
 
Was this article helpful?
 Yes  Somewhat  No
If none of the articles addressed your problem, please take a few minutes to describe the problem below.