Question:

How to set up the Auto Motion Plus 120Hz (AMP) option on my TV?

Answer:

The Auto Motion Plus 120Hz (AMP) option will help provide a smooth frame transition when watching fast action programing. This feature corrects two different picture problems, Blur and Judder. When set correctly AMP can reduce the amount of noticable blur or judder on your TV. If set incorrectly this option may over compensate for this motion and disrupt your veiwing experience. The AMP feature refers to the process of inserting extra frames (interpolation) into the video. Your TV is always processing at 120Hz. For more information on this process click here. AMP is available with all sources, picture modes, and resolutions with the execption of the PC input or any input relabled as PC. There are six possible settings for Auto Motion Plus 120Hz;

1. Off: Disables the interpolation of frames but does not disable the 120Hz processing.
2. Clear: This preset is optimized for high blur reduction but low judder reduction.
3. Standard: This preset is used for most programing with medium blur and judder reduction.
4. Smooth: This preset is used for high judder reduction but low blur reduction.
5. Custom: This is a user defined setting where you can set the judder and blur reduction to your personal preference.

Note: This is the only mode that the Blur and Judder reduction adjustment bars will be available for modification.

6. Demo: This is a preset generally used for in store demonstrations. This mode will split the TV screen in half and apply the Standard AMP setting to one side of the sceen and no AMP to the other side so you can see the difference.

Follow the steps below to set your AMP option.

1. With your television powered on press the MENU button.

2. The Picture section of the Main Menu will be selected by default, if not use the ▲ or ▼ arrow button to select the Picture section, and then press ENTER ().

3. Use the ▲ or ▼ arrow button to select Picture Options in the menu, and then press ENTER.
4. In the Picture Options menu use the ▲ or ▼ arrow button to select the Auto Motion Plus 120Hz option, and then press ENTER.

5. The Auto Motion Plus 120Hz Menu will appear, use the ▲ or ▼ arrow button to select your desired setting, and then press ENTER.

Note: The adjustment bars (blur and judder) will only be available when AMP is set to Custom. If any other AMP setting is selected these adjustments will be in accessable.

6. Press the EXIT button to exit the Menu.