After you have run the Channel Memorization process and your TV has stored all available channels, you can remove channels from the memorized list so your TV will skip over them when you scroll through the channels using your remote.

Note: You can still access any channels you remove by typing the channel number on your remote’s keypad.

Accessing the Channel List

To delete a channel, you need to access the Channel List. To access the Channel List, follow these steps:

1. Press the MENU button on your remote.
2. Highlight Channel, and then press ENTER.
3. Highlight Channel List, and then press ENTER.

Note: You can also press the CH. LIST button on your remote to access the Channel List. The CH. LIST button is located below the Volume – button.

 

Deleting a Channel

When you enter the Channel List, you will be in the Added Channels section. To remove a channel, follow these steps:

1. Press the ◀ button (if you remote has a wheel, press down on the left side of the wheel), and then highlight Added Channels on the left side of the menu.
2. Use the ▲ or ▼ button to select All Channels, and then press the ENTER button. On the right, the All Channels screen displays all currently available channels.

 

3. Use the ▲or ▼ buttons to select the channel you want to delete, and then press the TOOLS button on your remote control.

 

4. Delete should be highlighted at the top of the list. Press ENTER to delete the channel.

 

Note: The Deleted channel will still appear in the All Channels menu.

5. Press the EXIT button to exit the menu. 

If you want to Add (Restore) a channel to your Added Channels list, follow Steps 1 through 3, and then select Add in the menu and the channel will be added to your Added Channels list. 

If You Still Need Help

If you are still having a problem after following the steps above, please contact us for further support. When an agent is available, you can click the "Live Help – Start Chat" button below and begin chatting with a live technical support agent. You can also click the "Phone Support" button, fill out a service request with the details of this session, and then call in and speak to a technical support agent.