Home > Audio Troubleshooting > Audio > No Audio > I See the Volume Wheel on the TV Screen > I Hear The Audio But It Is Very Low > Volume Level Set Too Low On External Device
Volume Level Set Too Low On External Device

Question:

How to adjust the volume correctly without damaging the TV speakers?

Answer:

To raise the volume, follow these steps:

  1. Turn the volume on the TV down to a reasonable level (around 15).
  2. Press [Volume Up] on the connected device (not the remote) until it is all of the way up.

    3. Example: on most cable boxes they will have volume controls for their internal volume settings on the front of the device. Press the volume + button on the device to raise the internal volume of the unit.

    1. Volume Level Set Too Low On External Device (Verified)(132420) 1.bmp

    Note: You may be able to see a volume bar appear on the screen while raising the volume, it will look different from your normal televisions volume bar.

  1. Adjust the TVs volume to meet your requirements.

Important: If you do not turn the volume on the TV down before adjusting the volume on the device you have connected to it, you could damage the speakers in the TV.

If You Still Need Help

If you are still having a problem after following the steps above, please contact us for further support. When an agent is available, you can click the �Live Help � Start Chat� button below and begin chatting with a live technical support agent. You can also click the �Phone Support� button, fill out a service request with the details of this session, and then call in and speak to a technical support agent.

 
 
Was this article helpful?
 Yes  Somewhat  No
If none of the articles addressed your problem, please take a few minutes to describe the problem below.