|
PROBLEMS COVERED
- Washer will not fill
or has an nF error code
- Washer does not have
enough water
- Washer fills with wrong
temperature water
PROBLEM 1:
Washer will not fill
or has an 'nF error code'
SOLUTION 1:
- Check water supply
- Ensure hot and cold water lines are connected
- Confirm supply valves are fully open
- Use factory-supplied water lines
PROBLEM 2:
- Washer does not have
enough water
SOLUTION 2:
- Maximize water usage
- Verify proper washer calibration
- Select appropriate cycle for load type
- Utilize settings like Extra Rinse or Aqua
Jet
- Set higher soil level
PROBLEM 3:
- Washer fills with wrong
temperature water
SOLUTION 3:
- Check washer's connections
- Confirm selected cycle uses desired water
temperature
- Ensure hot and cold water supply valves
are fully open
- Check proper connection of water supply
hoses
- Clean inlet filter screens
- Check water heater setting and capacity
|
