To connect your LED
television to your home network with a wireless connection, you need the
following equipment:
- An Internet
connection.
- A wireless
router.
After you have all of the
above equipment, you can begin connecting your TV to your network by following
these steps:
- Press the
MENU button.
- Use the ▲ or ▼ buttons to
select Network, and then press
ENTER.
- Network Setting will be
selected by default, press ENTER to
continue.
- The Nework Setup will
begin with a brief summary of the benefits of connecting to the network, Start
will be highlighted by default, press ENTER to continue.
- Select the wireless
network connection method, and then press ENTER. Next will be highlighted, press
ENTER again to continue.
- Select your wireless
network from the list, and then press ENTER. Next will be highlighted, press
ENTER to continue.
Note:
If your network is password protected you will need to enter your
security password to connect.
Important: Your wireless
encryption key is case sensitive
- The TV will attempt to
connect to your network.
- If successful 'Next' will
be highlighted, Press ENTER to
continue.
- If you have failed the
network connection click here for help.
Note:
If you have high security on your network or need to setup your
network information differently than an automatic use the ▲ or ▼ buttons to
select IP Settings, switch to Manual, and make your needed
adjustments.
- You will return to the
Network Menu. Press EXIT to leave the
menu.
|
|
