Question:

How to connect my HD box, recording device, and TV using HDMI cables?

Answer:

To connect your HD box, recording device, and TV with an HDMI cable, follow these steps:

1. Connect one end of a coaxial (RF) cable to the wall and the other end to the CABLE IN or SATELLITE IN on your HD Box.
2. Connect a set of composite video (yellow) and audio (red and white) cables from the video and audio AV OUT on the HD Box to the video and audio AV IN on your Recording Device.

3. Connect a HDMI cable from the HDMI out on the Recording Device to the HDMI in on the TV (see illustration below).
   

Note: Because you will be using 2 HDMI connections we recomend you label the inputs on your TV so you do not confuse the two inputs.

4. Connect the HDMI cable from the HDMI OUT on the HD Box to the any of the HDMI inputs on the TV.

5. Use the remote of the recording device to switch the recording device's input to the AV input to which you've connected your HD box.
6. Press the SOURCE button on the TV's remote to switch between:
• The Recording Device (HDMI selected in step 3).
• The HD Box (HDMI selected in step 4).

Note: We recomend labeling your inputs to avoid confusing the HDMI inputs.

If You Still Need Help

If you are still having a problem after following the steps above, please contact us for further support. When an agent is available, you can click the �Live Help � Start Chat� button below and begin chatting with a live technical support agent. You can also click the �Phone Support� button, fill out a service request with the details of this session, and then call in and speak to a technical support agent.