Question:

How to connect a recorder to a TV using Composite A/V cables?

Answer:

To connect a recorder to your TV with Composite A/V cables, follow these steps:

1. Connect the coaxial cable from the antenna or cable jack on your wall to the RF IN on your recorder.
2. Optional: Connect the second length of coaxial cable from the OUT of the recorder to the ANT IN (Coax) connection on your television.

Note: Completing this step allows you to turn the recorder off and still watch TV. To do this, press the TV button on the TV's remote to switch to the TV input.

3. Connect the composite video (Yellow) and audio (red and white) cables from the Composite video and audio OUT on your recorder to AV IN on your TV.

Note: The AV in is a shared connection with the component input. so you will see that the green input labled Y also has a yellow ring around it to identify it as the composite vide connection. On the TV the connection jacks are facing down.

4. Press the SOURCE button on the TV's remote one or more times until you have selected COMPONENT.

Note: If you are still having problems getting your equipment to work properly, go to our advanced connection guide by clicking here.

If You Still Need Help

If you are still having a problem after following the steps above, please contact us for further support. When an agent is available, you can click the �Live Help � Start Chat� button below and begin chatting with a live technical support agent. You can also click the �Phone Support� button, fill out a service request with the details of this session, and then call in and speak to a technical support agent.