Home > Setup & Installation ► > Connections ► > How To Connect A Recording Device (DVD Recorder, VCR, Etc.) > Connect A Recording Device To A TV With No Set-Top-Box > Connect A Recording Device With A Digital Tuner > Coax (RF)
Coax (RF)

Question:

How to connect a recorder to your TV with Coax (RF)?

 

Answer:

To connect a recorder to your TV with Coax (RF), follow these steps:

  1. Connect the coaxial cable from the antenna or cable jack on your wall to the RF IN on your recorder.
  2. Connect the second length of coaxial cable from the OUT of the recorder to the ANT In (Coax) connection on your television.

  1. Press the TV button on the TV's remote.
  2. You may need to preform an "Auto Program" to recieve the signal. If you do not know how to preform an "Auto Progrm" please click here for instructions.

Note: If you are still having problems getting your equipment to work properly, go to our advanced connection guide by clicking here.

If You Still Need Help

If you are still having a problem after following the steps above, please contact us for further support. When an agent is available, you can click the "Live Help - Start Chat" button below and begin chatting with a live technical support agent. You can also click the "Phone Support" button, fill out a service request with the details of this session, and then call in and speak to a technical support agent.

 
 

Please contact our technical support team so that we can further troubleshoot your product over the phone and determine if service is needed. Click the phone support button below to receive a transaction number which will provide the technical support agent with the details of this session.


Was this article helpful?
 Yes  Somewhat  No
If none of the articles addressed your problem, please take a few minutes to describe the problem below.