Home > Display or Screen > How To Change The Picture Mode
How To Change The Picture Mode
Cyber

Question:

How To Change The Picture Mode

 

Answer:

Turn on your TV and press the MENU button on your remote control.

The main menu will appear, and the "Picture" menu will be selected by default. If it's not highlighted, use the up or down arrow buttons to navigate to the "Picture" section and press ENTER.

Within the "Picture" menu, the "Mode" option should be selected by default. If not, use the up or down arrow buttons to highlight "Mode" and press ENTER. A popup menu will appear.

Browse through the available modes using the up or down arrow buttons, and select the one you prefer. Then, press ENTER to confirm your choice.

Finally, press the EXIT button on your remote control to exit the menu and save your new picture mode settings.

 

  1. With the TV ON press the MENU button. [The Main Menu Appears]
  2. The "Picture" menu will be selected by default if it is not use the up or down arrow button to select the "Picture" section, and then press ENTER. [The selection bar will move to the option on the right side of the menu]

  1. "Mode" should be selected by default but if not use the up or down arrow button to select the "Mode" option, and then press ENTER. [A popup menu will appear]
  2. Use the up or down arrow button to select the desired mode, and then press ENTER. [The popup menu will close]

  1. Press the EXIT button to close the menu. [Your picture mode is now set]
 

Please contact our technical support team so that we can further troubleshoot your product over the phone and determine if service is needed. Click the phone support button below to receive a transaction number which will provide the technical support agent with the details of this session.


Was this article helpful?
 Yes  Somewhat  No
If none of the articles addressed your problem, please take a few minutes to describe the problem below.