Cyber
Cyber
Question:
How
to set up the First Time Setup for the remote?
Answer:
Subject: First
Time Setup
When
the remote is initially turned it will go through an initial setup similar to
the plug and play setup on the television.
To setup the remote follow these steps.
- Connect the Wireless lan
adapter to the USB 2 port on the TV.
- When you turn on
your remote it will display a screen allowing you to select the menu
language for the remote and instruct you to turn on the TV, Press the
power button to power on the TV, and then tap 'Ok'.
- Your
remote will be displaying the Connect TV screen (see below) and your TV will be
displaying the remote pairing screen (see below). Tap "Ok" to continue.
Note:
If you tap Skip you will exit the set and will not be able to control
the TV wirelessly with the remote control. Power off the TV to stop its
search for the remote control.
|
|
Touch
Remote Screen
|
TV
Screen
|
- Place
the remote within 8 inches of the TV's wireless adapter.
- Wait
for the TV and touch remote to pair, and then tap OK.
- Continue
with on-screen instructions for setting up the TV.
|