Home > Features & Specs > Adjusting The Digital Noise Reduction (DNR) Feature
Adjusting The Digital Noise Reduction (DNR) Feature
Cyber

Question:

How do I adjust the Digital Noise Reduction (DNR) feature on my TV?

 

Answer:

 The Digital Noise Reduction feature reduces the noise on incoming signals caused by weak signal, strong signal, electromagnetic interference, and other video interference.

Reducing this noise will reduce the amount of flickering in the picture.

Sometimes this feature needs to be adjusted to get the best possible picture.

 

To adjust this feature follow the steps bellow:

  1. With your TV powered on press the MENU button to open the main menu.
  2. With the Picture menu selected press ENTER.

    3. Note: In the menu the section names are displayed on the left side and side ways.

  1. Use the up or down arrow to select the Picture Options, then press ENTER.
  2. Use the up or down arrow to select the "Digital NR" option, then press ENTER.
  3. Use the up or down arrow to select the new DNR setting (Off, Low, Med, High, Auto), then press ENTER.
  4. Press EXIT to exit the menu.

 

 
 

Please contact our technical support team so that we can further troubleshoot your product over the phone and determine if service is needed. Click the phone support button below to receive a transaction number which will provide the technical support agent with the details of this session.


Was this article helpful?
 Yes  Somewhat  No
If none of the articles addressed your problem, please take a few minutes to describe the problem below.