Home > Features & Specs > Channel > Fine Tune
Fine Tune
No title

Subject:  Fine Tune

 

The "Fine Tune" feature can be selected after an auto program.

Fine tune is used for manually tuning an analog station.

This option cannot be used with digital signals.

 

To use "Fine Tune"

  1. With the TV On make sure you are on the "TV" source. If you are not on the TV source you will not be able to access the Channel portion of the Menu. Press SOURCE and select TV.
  1. Press MENU. [The Main Menu appears]
  1. Use the up or down arrows and select the "Channel" portion of the menu, and then press ENTER. [The selection bar will move to the right side of the menu]
  2. Note: If you cannot select "Channel" because it is grayed out or skips over it please return to Step 1.

  1. Use the up or down arrows to select "Fine Tune", and then press ENTER. [The Fine Tune Menu will appear on the screen]
  2. Note: "Fine Tune" will only be selectable if you are on an analog station.

  1. Use the left and right arrow buttons to adjust the signal + or - for fine tuning.
  2.  

 
Was this article helpful?
 Yes  Somewhat  No
If none of the articles addressed your problem, please take a few minutes to describe the problem below.