Question:

How do I enable and use the RGB Only Mode option on my television?

Answer:

Subject:  RGB Only

The RGB Only Mode option is used for calibration purposes only.

With this option turned on the TV can apply a Red, Green, or Blue filter for use when calibrating the TV.

Off: Disables RGB Only Mode.

Red: Applies a Red Filter to the picture.

Green: Applies a Green Filter to the picture.

Blue: Applies a Blue Filter to the picture.

Follow the steps below to set RGB Only Mode option.

With your television powered on press the MENU button.[The Main Menu will appear]



The Picture section of the Main Menu will be selected by default, if not use the up arrow or down arrow button to select the Picture section, and then press ENTER ().

[The selection bar will move to the right side of the menu]



Use the up arrow or down arrow button to select "Advanced Settings" in the menu, and then press ENTER.

[The Advanced Settings menu will appear]



In the Advanced Settings menu use the up arrow or down arrow button to select the RGB Only Mode option, and then press ENTER.

[The Advanced Settings menu will disappear and sub RGB menu will appear]



Use the up arrow or down arrow button to select your desired Filter, and then press ENTER.

[You will return to the Advanced Settings menu]



Press the EXIT button to exit the Menu.

Note: To return the TV to no colored filter follow the instructions above and select "Off" in step 5.