Home > Display or Screen > Picture Options > Digital NR
Digital NR
Cyber

Subject:  Digital NR

The Digital NR (Noise Reduction) option will help eliminate any excess digital noise in a picture and help to reduce any flicker caused by this.

This option is intended for 480i video which will generally have the most "noise" in the signal.

There are five options for setting Digital NR:

  1. Off: Turns the Digital NR filter off.
  2. Low: Sets the Digital NR filter for low.
  3. Medium: Sets the Digital NR filter to medium.
  4. High: Sets the Digital NR filter to high.
  5. Auto: The Digital NR filter will automatically switch between High to Off depending on the incoming signal.

Follow the steps below to set your size.

  1. With your television powered on press the MENU button.

  1. The Picture section of the Main Menu will be selected by default, if not use the up arrow or down arrow button to select the Picture section, and then press ENTER.

  1. Use the up arrow or down arrow button to select Picture Options in the menu, and then press ENTER.
  2. In the Picture Options menu use the up or down arrow button to select the Digital NR option, and then press ENTER.

  1. The drop down menu will appear, use the up or down arrow button to select your desired setting, and then press ENTER.

  1. Press the EXIT button to exit the Menu.

 
 

Please contact our technical support team so that we can further troubleshoot your product over the phone and determine if service is needed. Click the phone support button below to receive a transaction number which will provide the technical support agent with the details of this session.


Was this article helpful?
 Yes  Somewhat  No
If none of the articles addressed your problem, please take a few minutes to describe the problem below.