Home > Display or Screen > Picture Options > Blue Only Mode
Blue Only Mode
Cyber

Question:

How to set Blue Only Mode on the TV?

 

Answer:

Subject:  Blue Only Mode

The Blue Only Mode option is used for calibration purposes only.

With this option turned on the TV will apply a blue filter for use when calibrating the TV.

The only options for setting Blue Only Mode are On or Off.

  1. On: Enables Blue Only Mode.
  2. Off: Disables Blue Only Mode.

Follow the steps below to set Blue Only Mode option.

  1. With your television powered on press the MENU button.

  1. The Picture section of the Main Menu will be selected by default, if not use the up or down arrow button to select the Picture section, and then press ENTER.

  1. Use the up or down arrow button to select Picture Options in the menu, and then press ENTER.
  2. In the Picture Options menu use the up or down arrow button to select the Blue Only Mode option, and then press ENTER.

  1. The drop down menu will appear, use the up or down arrow button to select your desired setting, and then press ENTER.

  1. Press the EXIT button to exit the Menu.

 

 
 

Please contact our technical support team so that we can further troubleshoot your product over the phone and determine if service is needed. Click the phone support button below to receive a transaction number which will provide the technical support agent with the details of this session.


Was this article helpful?
 Yes  Somewhat  No
If none of the articles addressed your problem, please take a few minutes to describe the problem below.