PROBLEM :

Smart Auto cycle Lights Blinking On The Samsung Dishwasher

SOLUTION :

Some models of dishwashers do not have a digital display, so they use blinking lights instead of error codes. The combination of blinking lights determines what the code is. However, since lights may blink as part of regular use, you should really only consider this an error code if the dishwasher is not working normally. Resolving the error code typically involves a slight correction.

Important : If your dishwasher is displaying a code instead of blinking lights, see our other article for the meaning of the code.

Smart Auto, Heavy, and Delicate

This means the temperature sensor is failing.

1. Empty the dishwasher.

2. Add detergent, and then run a normal cycle.

If the error still occurs, switch off power to the dishwasher at the circuit breaker, and request service.

Smart Auto and Heavy

This means there is too much water in the dishwasher. This is often related to a drain issue. See our troubleshooting guide for more information.

Smart Auto and Heavy

This means there is too much water in the dishwasher. This is often related to a drain issue. See our troubleshooting guide for more information.

Smart Auto, Normal, and Delicate

This means the water is too hot.

Verify the hot water supply is not set above 176 degrees Fahrenheit (or 80 degrees Celsius).

If it is not, but the error still occurs, service is required.

Smart Auto and Normal

This means the dishwasher is too hot.

1. Empty the dishwasher.

2. Add detergent, and then run a normal cycle.

If the error still occurs, switch off power to the dishwasher at the circuit breaker, and request service.

Smart Auto

This means the water pressure or temperature is not correct.

• Verify the water pressure and temperature meets the water supply requirements.
  
  
• Floodsafe hoses are not compatible with Samsung dishwashers and should not be used.
  
  
• Verify the water supply is turned on.
  
  

If the error still occurs, visit the Support Center to request service.