Question:

How can I fix the Waterwall reflector error on my dishwasher?

Answer:

Verify that there are no obstructions like pots or knives blocking the WaterWall reflector. Also check if the packing tape has been removed during installation.

Remove the bottom rack to access the WaterWall assembly and its guide rail.

Ensure the WaterWall logo faces forward and upward; adjust the position of the reflector if necessary.

Lift the vane and reseat it on the gray shuttle if installed incorrectly.

Power cycle the dishwasher by turning off the circuit breaker for 2 minutes to clear the error code.

If the error code persists after proper adjustment, troubleshoot further or contact customer support.

Terms:

WaterWall reflector: A component inside the dishwasher responsible for directing water effectively.

Packing tape: Tape used during shipping to secure components in place.

Guide rail: A track where the WaterWall reflector moves along.

Gray shuttle: Part of the WaterWall assembly where the reflector sits on.

Vane: The movable part of the WaterWall reflector.