PROBLEM :

Remove the TV stand

SOLUTION :

Note: You will need a Phillips screwdriver.

To remove the stand from the back of the TV, please perform the following:

1. Lay your TV with the screen down on a soft surface, like a couch or bed. Make sure the bezel is supporting the TV weight and there is nothing that can puncture or apply pressure to the panel. This will damage your screen, and it will not be covered under warranty.
   
   
2. Screws that need to be removed will have the letter S above the holes. Depending on your model, there will be 3 or 5 screws.
   
   
3. With all the screws removed, pull the stand down and then lift up to remove the guide tab out of the guide hole in the TV.