PROBLEM : RGB only on the TV

SOLUTION :

The RGB Only Mode option is used for calibration purposes only. With this option turned on, the TV can apply a Red, Green, or Blue filter for use when calibrating the TV.

• Off: Disables RGB Only Mode.
  
  
• Red: Applies a red filter to the picture.
  
  
• Green: Applies a green filter to the picture.
  
  
• Blue: Applies a blue filter to the picture.

Follow the steps below to set the RGB Only Mode option:

1. With your television powered on, press the MENU button.
   
   
2. Select the Picture section, and then press ENTER.
   
   
3. Use the up arrow or down arrow button to select Advanced Settings in the menu, and then press ENTER.
   
   
4. Select the RGB Only Mode option, and then press ENTER.
   
   
5. Use the up arrow or down arrow button to select your desired filter, and then press ENTER.
   
   
6. Press the EXIT button to exit the Menu.
   
   Note: To remove the colour filter, select Off in Step 5.